Culligan Ultra Filtration - Filter Replacement Cartridge - Ecotip Solutions
Culligan Ultra Filtration - Filter Replacement Cartridge - Ecotip Solutions

Culligan Ultra Filtration - Filter Replacement Cartridge

ден 13,056.00 MKD
Product number: D1030469

Turbidity Filter
Removes unwanted elements such as sand, dust, and other suspended particles, making your water clearer.

Carbon Block Filter
Designed to address common water quality issues by removing all traces of impurities and turbidity, as well as unpleasant tastes and odors caused by the presence of chlorine.

Ultrafiltration
Effectively removes viruses and bacteria from the water without altering its taste or removing essential mineral salts.

The carbon pre-filtration kit complies with NSF/ANSI 42 standards for chlorine reduction.

Easy Cartridge Replacement
Follow these simple steps to replace the filter cartridge:

  1. Turn off the water supply to the filter and release pressure by letting the water run until it stops.

  2. Lift the gray handle upward to release the filter.

  3. Insert the new filter into the base holder and tilt the top of the filter back into position.

  4. Lower the gray handle to lock the filter in place.

  5. Turn on the water and check for leaks.

  6. Flush the system for 10 minutes before use.

Filter Lifespan: 3,000 liters
Recommended Replacement Interval: At least once per year

Pairs well with
Specifications

🌀 Turbidity Filter
Removes sand, dust, and suspended particles, making the water visibly clearer and free from floating debris.

🧱 Carbon Block Filter
Targets chlorine, odors, turbidity, and taste issues. Eliminates unpleasant smells and residual impurities — ensuring great-tasting, safe water.
✅ NSF/ANSI 42 certified for chlorine reduction

🧪 Ultrafiltration
Removes viruses and bacteria from the water without altering mineral content or taste — delivers safe and naturally balanced water.

🔄 Easy Cartridge Replacement
🛠️ How to Replace Your Filter Cartridge:

1️⃣ Turn off the water supply and dispense water until flow stops (to relieve pressure).
2️⃣ Lift the gray handle upward to release the existing filter.
3️⃣ Insert the new filter into the holder and tilt it backward to rest against the system.
4️⃣ Lower the gray handle to lock the filter in place.
5️⃣ Turn the water back on and check for leaks.
6️⃣ Flush the system for 10 minutes before use.
© 2025 Ecotip Solutions.