Aquaphor S550 Softener
Aquaphor S550 Softener
Aquaphor S550 Softener
Aquaphor S550 Softener

Aquaphor S550 Softener

ден 51,660.00 MKD

Extra-compact and highly efficient cabinet water softener that fits under the counter

Exceptionally salt- and water-efficient whole-home water softener. It is also an eco-friendly solution: damaging salt emissions are reduced by up to 30%.

Requires up to 30% less salt
Maximum efficiency with minimum salt consumption thanks to the unique tank design and extra-fine ion exchange resin. The latter lasts 10 times longer than that in typical water softeners.

2-in-1: water softening & iron removal
Removal of high concentration of Fe (up to 14 mg/L) and hardness salts.

Key Specifications:
Dimensions:322 x 432 x 554 mm (W х L х H)
Weight:35 kg(gross)
Flow Rate: Up to 1.4m³/h (23-35 L/min)
Resin Volume: 15 L
Operating Pressure: 1.4-7 bar

Source water requirements 
Water hardness, mg-eq / l* no more than 24 
Content of divalent iron, mg/l* no more than 10 
Content of ferric iron, mg/l no more than 0.3 
Manganese content, mg/l* no more than 3 рН 6 to 9 
Temperature, °C from +5 to +38 
Content of oil products, mg/l no more than 1 
Hydrogen sulfide, mg/l no more than 0.03(Softener S550) no more than 1 (Softener S550 P1)
Permanganate oxidizability, mgО2/l no more than 5 
Silicon, mg/l no more than 10 * 
The total “iron + hardness + manganese”, in terms of calcium carbonate, should not exceed the maximum compensated hardness indicated in the “Technical characteristics” table. 

The softener does not purify water from colloidal iron or iron contained in organic complexes.

Pairs well with
Specifications

Maximum capacity, g 1100
Maximum compensated hardness, mg/l 1200
Maximum concentration of dissolved iron and manganese, mg/l* 10
Minimum pH 6
Temperature of water and environment, °C +5...+38
Water pressure, MPa 0.14–0.7
Minimum water flow for backwash, l/min** 7.6
Maximum flow to drain during regeneration, l/min 9.1 Nominal / maximum flow, l / min 23 / 35
Pressure loss at flow 22.7 l/min (6 gpm), MPa*** 0.1 Capacity in HE mode, kg of salt / gram of hardness 0.8 / 465
Capacity in HC mode, kg of salt / gram of hardness 2.1 / 903
Maximum capacity in AU mode, kg of salt / gram of hardness 3.3 / 1100
Regeneration method Intelligent, by water meter
Power options 12 VAC; 50/60 Hz; 0.015 kWh
Connection ports (NPT) 1" (MNPT)
Minimum drain line diameter, mm (in) 16 (5/8)
Filtration tank size (ID × H), mm 267 × 277
Height, cm 55.4
Base, cm 32.2 × 43.2
Gross weight, kg 35

Filter medium and its quantity
Superfine monodisperse ion exchange resin, l 15
Quartzite, kg 0.8 or KDF85****, l 0.35

Reducing the concentration of iron to 0.3 mg/l and below, manganese - to 0.1 mg/l and below.
The flow rate must be checked at the end of the drain line. For the correct selection of the filter, use the operating capacity and pressure drop. Long-term operation at flows higher than those tested (more than 30 l/min) may lead to a decrease in cleaning efficiency.
Only for version S550 P1.
© 2026 Ecotip Solutions.